GAMCIT
From SEDSWiki
Caltech's GAMCIT payload (Gamma-ray Astrophysics Mission, California Institute of Technology), the first space payload built by Caltech SEDS, flew as a Get-Away Special payload on STS-77 in May 1996. GAMCIT, originally designed by Astronaut John Grunsfeld, was designed to study an enigmatic source of cosmic radiation known as gamma ray bursts. While these intense bursts of high-energy radiation were first discovered in the late 1960s by satellites watching for clandestine nuclear tests, their precise nature and origin still remains an intriguing astrophysical mystery.
The mission operated for approximately seven days before battery power ran out and the experiment was shut down. Due to the film slipping off the sprockets during launch, the optical camera system failed to operate correctly, and no images were obtained. The gamma-ray detectors worked well, obtaining nearly two gigabytes of data including a gamma-ray burst. The post-flight calibration data demonstrated that the gamma-ray detectors survived launch and landing without incident, and performed as expected. All of the electronic subsystems performed nominally throughout the mission, including the housekeeping sensors (temperature, pressure, battery voltage). The Global Positioning Satellite (GPS) receiver worked better than expected, providing the payload with accurate time and even acquired a few position fixes throughout the mission.
GAMCIT also recorded the energy and arrival time of each incoming gamma ray photon. This will allow the GAMCIT team to perform microsecond timescale analysis of the structure of the bursts. GAMCIT also contains a space-qualified Global Positioning System (GPS) receiver—the first ever to fly in a Get-Away Special payload. This GPS receiver will provided GAMCIT with accurate time and position data that can be used in post-flight data analysis.
While a Research Fellow at Caltech, Dr. Grunsfeld and SEDS members laid the initial groundwork for the experiment. After Dr. Grunsfeld joined the astronaut corps, the payload was designed and constructed by Caltech undergraduate students. The team leaders were Ben McCall (project manager), Albert Ratner (mechanical systems), and Michael Coward (electronics).
