Template:SEDSAT-2 Interface Output Power
From SEDSWiki
Go to: all Power interfaces - all SEDSAT-2 Outputs
- From: Power -
- 5.0 and 3.3VDC standard voltage for logic devices
- 3.3V DC and 150mA for the camera unit - 2.8VDC 10 mA 28 mW (for 3 axis magnetometer)
- 2.8VDC 55 mW (for attitude control VGA sensor)
-To communications:Trasceiver(transmit:1.2A@3.7V for 10 min per orbit,receive:60mA@3.7V for 90 min per orbit),MCU and TNC each(10mA@3.3V for 90 min orbit)
--Other subsystem may add the voltages, amps and at what tolerance they need in their own input table and it will be added as a Power output here.--
